GE - POLYVENT 500 0.2 PTFE , EA1 by GE at Water Softener Guy. MPN: 6713-5036. Hurry! Limited time offer. Offer valid only while supplies last. PolyVENT 500, 1/4 to 3/8'' SB, outlet 1/4 to 3/8'' SB PolyVENT are integral filter products for sterile venting of vessels and tanks. Membrane made of hydrophobic 0.2 µm PTFE membrane. Validated for 50 steam autoclave cycles; compatible with EtO. Testable by Water Break Through (WBT) test or bubble point testing. Pass USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Bidirectional and autoclavable. These devices are constructed from a single, standardized set of
Product Description & Reviews
PolyVENT 500, 1/4 to 3/8'' SB, outlet 1/4 to 3/8'' SB PolyVENT are integral filter products for sterile venting of vessels and tanks. Membrane made of hydrophobic 0.2 µm PTFE membrane. Validated for 50 steam autoclave cycles; compatible with EtO. Testable by Water Break Through (WBT) test or bubble point testing. Pass USP Class VI biosafety tests for plastics. Manufactured in clean room facilities. Bidirectional and autoclavable. These devices are constructed from a single, standardized set of materials PTFE membranes and polypropylene housing to simplify the approval process. Features: •Membrane made of hydrophobic 0.2 µm PTFE membrane. •Validated for 50 steam autoclave cycles; compatible with EtO. •Testable by Water Break Through (WBT) test or bubble point testing. •Pass USP Class VI biosafety tests for plastics. •Manufactured in clean room facilities. •Bidirectional and autoclavable. These devices are constructed from a single, standardized set of materials PTFE membranes and polypropylene housing to simplify the approval process. Complete Packsize 1 Piece Connections 1/4 to 3/8 in SB Filtration Area 500 Filtration Media Polytetrafluoroethylene (PTFE) Flow Direction Bidirectional Housing Polypropylene (PP) Non-Pyrogenic non-reactive Operating Pressure Max. 2 bar - forward direction (29 psi - forward direction) Pore Size 0.2 Sealing Heat-fused Sterilization Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization. Support System Polypropylene (PP) Vent On inlet
Features & Highlights
- GE - POLYVENT 500 0.2 PTFE , EA1
Additional Information
Manufacturer:
GE Healthcare
Have questions about this item (6713-5036), or would like to inquire about a custom or bulk order?
If you have any questions about this product by GE, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
mpn: 2603T,
Polycap TF 36, 1.0 µm, with FNPT inlet and outlet Polycap TF made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing, are designed for use with organic solvents and chemically aggressive solutions. Resistan...
mpn: 6705-7500,
Polycap SPF 75, 1.0 µm, with SB inlet and outlet Polycap SPF (Serum Prefilter) is optimized for prefiltration applications and is typically used upstream of a Polycap AS or a Polycap PES capsule. Three layers of special media: fine and ultrafine gla...
mpn: 2702T,
Polycap TF 75, 0.2 µm, with FNPT inlet and outlet Polycap TF made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing, are designed for use with organic solvents and chemically aggressive solutions. Resistan...
mpn: 2700T,
Polycap TF 75, 0.1 µm, with FNPT inlet and outlet Polycap TF made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing, are designed for use with organic solvents and chemically aggressive solutions. Resistan...