Pentek 150164 3/4'' #10 VIH Blue Filter Housing with Valve and Pressure Relief
Pentek 150164 3/4'' #10 VIH Blue Filter Housing with Valve and Pressure Relief by Pentek at Water Softener Guy. SKU: CWD1950. MPN: 150164. Hurry! Limited time offer. Offer valid only while supplies last. This Pentek 150164 3/4'' #10 VIH blue filter housing with valve and pressure relief is for residential, commercial, and industrial applications. The sump and cap are made of reinforced polypropylene for strength and resistance to chemicals. The cap has 3/4'' female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. The valve in the cap eliminates the need for external shut-off valves by allowing both
Product Description & Reviews
This Pentek 150164 3/4" #10 VIH blue filter housing with valve and pressure relief is for residential, commercial, and industrial applications. The sump and cap are made of reinforced polypropylene for strength and resistance to chemicals. The cap has 3/4" female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. The valve in the cap eliminates the need for external shut-off valves by allowing both the inlet and outlet ports to be closed simultaneously. A pressure relief button on the inlet side of the cap releases pressure in the housing for easier filter cartridge replacement. The housing can be used with a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately). It has an initial pressure drop of 4 pounds per square inch (psi) at a flow rate of 8 gallons per minute (gpm), a maximum operating pressure of 125 psi, and a maximum operating temperature of 125 degrees F (51.7 degrees C). This filter housing is for use in various applications, including residential drinking water filtration, food service, and humidifying systems, among others.Specifications Filter cartridge size (H x W) (sold separately) 10 x 2-1/2 inches (254 x 63.5 mm) Initial pressure drop at 8 gpm 4 psi Maximum temperature 125 degrees F (51.7 degrees C) Maximum pressure 125 psi Maximum dimensions (H x W) 12-1/2 x 5-1/8 inches (318 x 130 mm)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Features & Highlights
- Standard filter housing for residential, commercial, and industrial applications
- Reinforced polypropylene for strength and chemical resistance
- Holds a 10" x 2-1/2" sediment or carbon filter cartridge (sold separately)
- Valve in cap eliminates the need for external shut-off valves
- Pressure relief button for easier cartridge replacement
5.13 x 12.75 x 5.13 inches
5.2 x 5.2 x 12.6 inches
Have questions about this item (150164), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Pentek, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
Handles hot air and oil mist from unload cycle of reciprocating/ piston compressor.Dust loading capacity is increased 40 -Percent - 50-Percent with prefilter. Washable - lukewarm water and mild detergent. Moisture resistant. Less maintenance.
Heavy duty industrial strength paper surrounded by heavy gauge galvanized expanded metal.Higher efficiency than many alternative media. Optimal surface area per given size. Less expensive. Optimal sealing surface and design. Dust loading capacity is ...
Rugged all steel construction with baked enamel finish.Brazed fittings for high vacuum duty. Filter change out differential: 10-Inch -15-Inch H2O above initial delta P. 99-Percent Plus removal efficiency std: Polyester=5 micron, Paper=2 micron. Seaml...
mpn: GRP-96-636, ean: 7440115124186,
Wilkerson Bowl with Drain & Sight Glass Metal Bowl w/Sight Glass, Manual Drain for F18, B18 or L18. Metal Bowl. Sight glass, manual drain. Used on F18, L18, B18.Metal Bowl. Sight glass, manual drain. Used on F18, L18, B18.