Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4'' x 4-5/8'', 5 Microns
Mega Sale! Save 29% on the Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4'' x 4-5/8'', 5 Microns by Pentek at Water Softener Guy. MPN: 155548-43. Hurry! Limited time offer. Offer valid only while supplies last. This Pentek EPM-BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 22,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene o
Product Description & Reviews
This Pentek EPM-BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 22,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4.3 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm4.3 psiChlorine reduction capacity22,000 gallons at 2 gpmTemperature range40 to 180 degrees F (4.4 to 82.2 degrees C)Maximum dimensions (H x W)9-3/4 x 4-5/8 inches (248 x 118 mm)Materials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Features & Highlights
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Nominal filtration rating of 5 microns
- Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 4.3 psi at a flow rate of 2 gpm
- Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
4.63 x 9.75 x 4.63 inches
4.5 x 4.5 x 9.8 inches
Have questions about this item (155548-43), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Pentek, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 155274-43, ean: 0051678274033,
This Pentek PCF1-20MB water deionization filter cartridge reduces hardness minerals in low flow rate medical, pharmaceutical, cosmetic, and circuit board manufacturing applications. The media is mixed bed (cation and anion) moist spherical bead deion...
mpn: PFC2FV803, ean: 0696737802521,
The Perfect Fry 2FK001 (Replaces the 2FV803) Filter is a genuine OEM (original equipment manufacturer) replacement part designed to be used with Perfect Fry ventless and hoodless deep fryers. This filter is designed using Perfect Fry's HEPA-style air...
mpn: EV9692-31, ean: 0054568590947,
Ever pure 4FC-S Filter Cartridge delivers premium quality water for drinking water, ice and steam applications. Increased capacity for extended reduction of chemical and mechanical contaminants. Improves the taste of fountain beverages and helps reta...
mpn: EP25, ean: 0016145604478,
The Aqua-Pure EP25 water filter is the replacement cartridge for the H-104, H-200, and H-220 Ever pure / Aqua-Pure water filter systems. It is a very long, round filter cartridge with a plug on one end.Replacement filter cartridge for Ever Pure H-104...