Dixon PL400 Aluminum Air Fitting, In-Line Lubricator, 3/4'' NPT, 70 SCFM, 200 PSI, 3.7 ozs Oil Capacity


Dixon PL400 Aluminum Air Fitting, In-Line Lubricator, 3/4'' NPT, 70 SCFM, 200 PSI, 3.7 ozs Oil Capacity by Dixon Valve & Coupling at Water Softener Guy. MPN: PL400. Hurry! Limited time offer. Offer valid only while supplies last. The minimum flow rate that must be achieved for the PL series lubricators to work is 30 SCFM. A flow rate less than 30 SCFM will not create the pressure difference needed between chambers to force the oil into the air stream. Can dispense standard air tool lubricant or Dixon anti-freeze lubricant. Lubricator body is 356-T6 aluminum. The lubricator has two reservoirs. The upper reservoir holds the oil and a lower reservoir that is the passageway for the air to enter. The air and oil mixture exits


Dixon PL400 Aluminum Air Fitting, In-Line Lubricator, 3/4'' NPT, 70 SCFM, 200 PSI, 3.7 ozs Oil Capacity by Dixon Valve & Coupling
4.8 out of 5 stars with 7 reviews
Condition: New
Availability: In Stock
$71.60


Quantity:  

 


Product Description & Reviews

The minimum flow rate that must be achieved for the PL series lubricators to work is 30 SCFM. A flow rate less than 30 SCFM will not create the pressure difference needed between chambers to force the oil into the air stream. Can dispense standard air tool lubricant or Dixon anti-freeze lubricant. Lubricator body is 356-T6 aluminum. The lubricator has two reservoirs. The upper reservoir holds the oil and a lower reservoir that is the passageway for the air to enter. The air and oil mixture exits through the lower reservoir. The oil adjustment valve between the two compartments initially allows air to enter the reservoir to pressurize it, and then it controls the amount of oil entering the air stream. The simple principle behind the operation of this lubricator does not provide for oil shut off when the tool is not being used. To prevent a pressure differential from forcing the remaining oil from the reservoir into the air line, turn the lubricator upside down or open the fill plug to depressurize the reservoir. 200 psi Maximum pressure rating

Features & Highlights

  • Transparent sight disc allows visual inspection of oil level
  • Installation is recommended within 25 feet of the tool to be lubricated
  • Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor
  • Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms
  • Oil flow regulated by screwdriver screw adjustment

Additional Information

Brand:
Dixon Valve & Coupling
Manufacturer:
Dixon Valve & Coupling
Category:
Lubricators
Model:
PL400
MPN:
PL400
UPC:
789957470417
Part Number:
PL400
Size:
3/4" NPT
Publisher:
Dixon Valve & Coupling
Binding:
Misc.
Item Weight:
1.55 pounds
Item Size:
6.7 x 3.9 x 4.2 inches
Package Weight:
1.55 pounds
Package Size:
4.4 x 4.3 x 7 inches

 


Have questions about this item (PL400), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Dixon Valve & Coupling, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


Parker 16L22BE Lubricator, Polycarbonate Bowl with Metal Bowl Guard, No Drain, 60 scfm, 3/8" NPT
mpn: 16L22BE,
This Parker Prep-Air II micro-mist lubricator for pneumatic systems provides proportional oil delivery over a wide range of air flows. It has a 2.6 oz. bowl and requires a minimum air flow of 1 standard cubic feet per minute (scfm) at a rate of 100 p...

NORGREN L74C-4AP-QDN 250PSI 1/2 IN NPT PNEUMATIC LUBRICATOR D548539
mpn: L74C-4AP-QDN,
NORGREN L74C-4AP-QDN 250PSI 1/2 IN NPT PNEUMATIC LUBRICATOR D548539Max Pressure: 250 PSI. Fitting Size: 1/2 IN. Other: NPT. SKU: D548539 (ALI).

Parker 15L22NA Lubricator, Polycarbonate Bowl with Metal Bowl Guard, No Drain, 40 scfm, 3/8" NPT
mpn: 15L22NA, ean: 0793518596577,
This Parker Prep-Air II micro-mist lubricator for pneumatic systems provides proportional oil delivery over a wide range of air flows. It has a 2 oz. bowl and a removable drip control knob for tamper resistance. It requires a minimum air flow of 2 st...

Parker 16L34BE Lubricator, Metal Bowl with Sight Gauge, Manual Drain, 90 scfm, 1/2" NPT
mpn: 16L34BE, ean: 0789957453038,
This Parker Prep-Air II micro-mist lubricator for pneumatic systems provides proportional oil delivery over a wide range of air flows. It has a 2.6 oz. bowl and requires a minimum air flow of 1 standard cubic feet per minute (scfm) at a rate of 100 p...



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - watersoftenerguy.com. All Rights Reserved.